|
|
|
Auto BMW 7 serie Sedan 740i AT (326 hp) (F01/F02 2008-2012)
Make | BMW |
Model | 7 serie |
Generation | F01/F02 2008-2012 years |
Serie | Sedan |
Trim | 740i AT (326 hp) |
Bodywork:
Number of seater | 5 | Capacity | 645 kg | Full weight | 2505 kg | Rear track/Front track | 1611 / 1650 mm | Wheelbase | 3070 mm | Ground clearance | 144 mm | Front/Rear axle load | 1200 / 1365 kg | Min/Max trunk capacity | 500-500 litre | Width | 1902 mm | Length | 5072 mm | Height | 1479 mm | Curb weight | 1935 kg | Permitted road-train weight | 4605 kg |
Gearbox and Handling:
Gearbox type | Automatic | Drive wheels | Rear wheel drive | Turning circle | 12.2 m | Number of gear | 6 |
Brakes:
Front brakes | Disc, ventilated |
Rear brakes | Disc, ventilated |
Suspension:
Front suspension | Independent, Stabilizer bar, Wishbone, Spring, Dampers |
Rear suspension | Independent, Stabilizer bar, Wishbone, Multi wishbone, Spring |
Operating characteristics:
Fuel | Gasoline | Gasoline type | 95 RON, 98 RON | Fuel tank capacity | 82 litre | Emission standards | EURO V | Max speed | 250 km/h | Acceleration (0-100 km/h) | 5.9 sec | Mixed driving fuel consumption per 100 km | 9.9 litre | City driving fuel consumption per 100 km | 13.8 litre | Highway driving fuel consumption per 100 km | 7.6 litre | Cruising range | 590 - 1080 km |
Engine:
Engine type | Gasoline | Engine capacity | 2979 cm3 | Engine power | 326 hp | Boost type | Biturbo | Presence of intercooler | exists | Turnover of maximum torque | 1500 - 4500 RPM | Stroke cycle | 89.6 mm | Number of cylinders | 6 | Valves per cylinder | 4 | Cylinder bore | 84 mm | Cylinder layout | Inline | Injection type | Direct injection | Maximum torque | 450 N*m | Max power at RPM | 5800 RPM |
Automobile BMW 7 serie Sedan 740i AT (326 hp) (F01/F02 2008-2012)
Do you like this site or this page? Please share it. Thank you!
Please help the project:
Thank you!
Equipment:
sedan |
sedan |
sedan |
sedan |
sedan |
sedan |
|
|
|
Car Configurator, Car Selection © 2023-2024 carconf.info
|