Auto Dodge Challenger Coupe 2-door 3.7 3MT (145 hp)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Make | Dodge |
| Model | Challenger |
| Generation | 1 generation 1970 years |
| Serie | Coupe 2-door |
| Trim | 3.7 3MT (145 hp) |
Bodywork:
| Number of seater | 4 |
| Rear track/Front track | 1516 / 1542 mm |
| Wheelbase | 2794 mm |
| Ground clearance | 158 mm |
| Width | 1933 mm |
| Length | 4859 mm |
| Height | 1293 mm |
| Curb weight | 1415 kg |
Gearbox and Handling:
| Gearbox type | Manual |
| Drive wheels | Rear wheel drive |
| Turning circle | 13 m |
| Number of gear | 3 |
Brakes:
| Front brakes | Drum |
| Rear brakes | Drum |
Suspension:
| Front suspension | Torsion |
| Rear suspension | Beam, Torsion beam, Torsion |
Operating characteristics:
| Fuel | Gasoline |
| Gasoline type | 92 RON |
| Fuel tank capacity | 68 litre |
Engine:
| Engine type | Gasoline |
| Engine capacity | 3700 cm3 |
| Engine power | 145 hp |
| Turnover of maximum torque | 2400 RPM |
| Stroke cycle | 105 mm |
| Number of cylinders | 6 |
| Valves per cylinder | 2 |
| Cylinder bore | 86 mm |
| Cylinder layout | Inline |
| Injection type | Carburetor |
| Maximum torque | 291 N*m |
| Max power at RPM | 4000 RPM |
Automobile Dodge Challenger Coupe 2-door 3.7 3MT (145 hp) (1 generation 1970-0)
Do you like this site or this page? Please share it. Thank you!
| LINK: | |
| BB CODE: | |
| HTML CODE: |
Please help the project: Thank you!
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| coupe | coupe | coupe |
language
Car Configurator, Car Selection © 2023-2024 carconf.info
carconf.info